Kia NiroEV 2019, Owner'S Manual

Page: 269 / 623

4 111
Features of your vehicle
Listed below are the examples of
proper switch settings. For loading
conditions other than those listed
below, adjust the switch position so
that the beam level may be the near-
est as the condition obtained accord-
ing to the list. High Beam Assist (if equipped)
The High Beam Assist is a system
that automatically adjusts the head-
lamp range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.
Operating condition
1.Place the light switch in the AUTO
position.
2.Turn on the high beam by pushing
the lever away from you.
3.The High Beam Assist ( ) indica-
tor will illuminate.
4.The High Beam Assist will turn on
when vehicle speed is above 40
km/h (25 mph).
5.The details of operation with the
light switch whilst the High Beam
Assist is on are below.
1) If the light switch is pushed
away, the High Beam Assist will
turn off and the high beam will
be on continuously.
2) If the light switch is pulled
towards you when the high
beam is off, the high beam will
be on without cancellation of the
High Beam Assist. (When you
take your hands off the switch
the lever will move to the middle
and the high beam will turn off.)
Loading condition
Switch
position
Driver only 0
Front passenger 0
Full passengers 1
Full passengers (including driver)
+ Maximum permissible loading
2
Maximum permissible
loading
3
ODEEV048516N