manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 587 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 587

Maintenance

74

7

Room lamp (Bulb type) bulb
replacement

1. Using a flat-blade screwdriver,

gently pry the lens cover from
lamp housing.

2. Remove the bulb by pulling it

straight out.

3. Install a new bulb in the socket.
4. Align the lens cover tabs with the

lamp housing notches and snap
the lens into place.

Room lamp (LED type) bulb
replacement

If the Room lamp (LED type) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

WARNING 

Prior to working on the Interior
lamps, ensure that the “OFF”
button is depressed to avoid
burning your fingers or receiv-
ing an electric shock.

ODE076049

CAUTION

Be careful not to dirty or dam-
age the lens, lens tab, and plas-
tic housings.

ODEP077070

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments