manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 245 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 245

4 87

Features of your vehicle

Electronic Parking Brake
(EPB) Warning Light
(if equipped)

This warning light illuminates:

• When the POWER button is in the

ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the EPB.
In this case , have your vehicle
inspected by a professional work-
shop. Kia recommends to contact
an authorised Kia dealer/service
partner.

✽

✽

NOTICE

- Electronic Parking

Brake (EPB) Warning Light

The Electronic Parking Brake
(EPB) Warning Light may illumi-
nate when the Electronic Stability
control (ESC) Indicator Light comes
on to indicate that the ESC is not
working properly (This does not
indicate malfunction of the EPB).

LED Headlamp Warning
Light (if equipped)

This warning light illuminates:

• When the POWER button is in the

ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the LED headlamp.

In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

This warning light blinks:

• When there is a malfunction with a

LED headlamp related part.

In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

CAUTION - 

LED

Headlamp Warning Light

Continuous driving with the
LED Headlamp Warning Light
on or blinking can reduce LED
headlamp (low beam) life.

EPB

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments