manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 365 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 365

Driving your vehicle

40

5

Set up

1. With the driver's door, bonnet

closed, fasten the driver's seat
belt or depress the brake pedal
and then press the Auto Hold but-
ton. The white AUTO HOLD indi-
cator will come on and the system
will be in the standby position.

2. When you stop the vehicle com-

pletely by depressing the brake
pedal, the AUTO HOLD indicator
changes from white to green.

3. The vehicle will remain stationary

even if you release the brake pedal.

4. If EPB is applied, Auto Hold will be

released.

Leaving

If you press the accelerator pedal
with  the shifter dial in D (Drive) or
manual mode, the Auto Hold will be
released automatically and the vehi-
cle will start to move. The indicator
changes from green to white.

ODEEV058151R

ODEEV058150R

WARNING

When driving off from Auto
Hold by depressing the acceler-
ator pedal, always check the
surrounding area near your
vehicle.
Slowly depress the accelerator
pedal for a smooth launch.

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments