Kia NiroEV 2019 Owner'S Manual Download Page 404

Page: 404 / 623

5 79

Driving your vehicle

Smart Cruise Control Switch

/ CRUISE : Turns cruise control

system on or off.

RES+: Resumes or increases cruise

control speed.

SET-: Sets or decreases cruise con-

trol speed.

: Sets vehicle-to-vehicle distance.

O/CANCEL : Cancels cruise control

operation.

Speed setting

To set smart cruise control
speed:

1. Press the

/CRUISE button, to

turn the system on. The CRUISE
indicator in the instrument cluster
will illuminate.

2. Accelerate to the desired speed.

The smart cruise control speed

can be set as follows:
• 10 km/h (5 mph) ~ 160 km/h

(100 mph): when there is no
vehicle in front

• 0 km/h (0 mph) ~ 160 km/h (100

mph): when there is a vehicle in
front

3. Move the lever down (to SET-),

and release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LCD
screen will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-
cally be maintained.

ODEEV058039N

ODE056039L

ODE056040L

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NiroEV 2019

Reviews:

Related manuals for NiroEV 2019

Brands by name

Popular brands

Kia NiroEV 2019, Owner'S Manual

Search results

Summary of Contents for NiroEV 2019

Reviews:

Related manuals for NiroEV 2019

Brands by name

Popular brands