Kia NiroEV 2019, Owner'S Manual

Page: 503 / 623

6 23
What to do in an emergency
4. Adjust the tyre inflation pressure
to the cold tyre recommended
pressure as indicated on the vehi-
cle’s placard or tyre inflation pres-
sure label located on the driver’s
side centre pillar outer panel. (In
this owner’s manual, refer to the
Tyre and Wheels, chapter 8.)
- To increase the inflation pres-
sure: Switch on the compressor,
position I. To check the current
inflation pressure setting, briefly
switch off the compressor.
- To reduce the inflation pres-
sure: Press the button (9) on the
compressor.
WARNING
Do not let the compressor run
for more than 10 minutes, other-
wise the device will overheat
and may be damaged.
CAUTION
If the inflation pressure is not
maintained, drive the vehicle a
second time,
refer to
Distributing the sealant. Then
repeat steps 1 to 4.
Use of the TMK may be ineffec-
tual for tyre damage larger than
approximately 4 mm (0.16 in).
Contact a professional work-
shop if the tyre cannot be made
roadworthy with the Tyre
Mobility Kit. Kia recommends to
visit an authorised Kia
dealer/service partner.
WARNING
The tyre inflation pressure must
be at least 250 kPa (36 psi/2.5
bar). If it is not, do not continue
driving. Call for road side serv-
ice or towing.