manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 332 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 332

5 7

Driving your vehicle

✽

✽  

NOTICE

If the steering wheel doesn't unlock
properly, the vehicle start/stop but-
ton will not work. Press the Power
button whilst turning the steering
wheel right and left to release the
tension. 

ACC (Accessory)

Press the Power button whilst it is in
the OFF position without depressing
the brake pedal.

The steering wheel unlocks (if
equipped with anti-theft steering col-
umn lock) and electrical accessories
are operational.
If the Power button is in the ACC
position for more than 1 hour, the but-
ton is turned off automatically to pre-
vent battery discharge.

ON

Press the Power button whilst it is in
the ACC position without depressing
the brake pedal.

The warning lights can be checked
before the vehicle is started. Do not
leave the Power button in the ON
position for a long time. The battery
may discharge, because the vehicle
is not ON.

CAUTION

You are able to turn off the vehi-
cle (START/RUN) or vehicle
power (ON), only when the vehi-
cle is not in motion. In an emer-
gency situation whilst the vehi-
cle is in motion, you are able to
turn the vehicle off and to the
ACC position by pressing the
vehicle start/stop button for
more than 2 seconds or 3 times
successively within 3 seconds.
If the vehicle is still moving, you
can restart the vehicle without
depressing the brake pedal by
pressing the vehicle start/stop
button with the shifter dial in the
N (Neutral) position.

Amber

Redish orange

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments