manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual

Introducing the Kia NiroEV 2019, an eco-friendly and powerful electric vehicle designed to revolutionize your driving experience. Unlock all the features and functionalities by downloading the free Owner's Manual from our manualshive.com, ensuring you have easy access to important information and maintenance guidelines for your NiroEV.

Share
Download
background image

Driving your vehicle

140

5

The Driver Attention Warning (DAW),
system is to warn the driver with any
hazardous driving situations upon
detecting the driver's fatigue level or
inattentive driving practices.

System setting and activation

System setting

• The Driver Attention Warning sys-

tem is set to be in the OFF posi-
tion, when your vehicle is first
delivered to you from the factory.

• To turn ON the Driver Attention

Warning system, turn on the vehi-
cle, and then select 'User Settings

Driver assistance 

Driver

Attention Warning 

High sensitiv-

ity/ Normal sensitivity' on the LCD
display.

• The driver can select the Driver

Attention Warning system mode.
- Off : The Driver Attention Warning

system is deactivated.

- Normal sensitivity : The Driver

Attention Warning system alerts
the driver of his/her fatigue level
or inattentive driving practices.

- 

High sensitivity : The Driver
Attention Warning system alerts
the driver of his/her fatigue level
or inattentive driving practices
faster than Normal mode.

• The set-up of the Driver Attention

Warning system will be main-
tained, as selected, when the vehi-
cle is re-started.

DRIVER ATTENTION WARNING (DAW, IF EQUIPPED)

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NiroEV 2019

Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Jeep 2009 Wrangler Owner'S Manual preview
2009 Wrangler
Brand: Jeep Pages: 496
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Paser UNICOM JVC Installation Manual preview
UNICOM JVC
Brand: Paser Pages: 2
Xblitz XME PRO User Manual preview
XME PRO
Brand: Xblitz Pages: 56
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53
Edelbrock 8135 Installation Instructions preview
8135
Brand: Edelbrock Pages: 4
Menabo KIT+1 MERAK Fitting Instructions Manual preview
KIT+1 MERAK
Brand: Menabo Pages: 8
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
Conrad TPMS-001 Operating Instructions Manual preview
TPMS-001
Brand: Conrad Pages: 8
Yakima SUPDawg Manual preview
SUPDawg
Brand: Yakima Pages: 10
WABCO 2S/2M Installation Instructions Manual preview
2S/2M
Brand: WABCO Pages: 40
Ranger design C24-DL Installation Manual preview
C24-DL
Brand: Ranger design Pages: 14

Brands by name

Popular brands

Load more brands