manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 249 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 249

4 91

Features of your vehicle

Ready Indicator 

This indicator illuminates :

• When the vehicle is ready to be

driven.
- ON : Normal driving is possible.
- OFF : Normal driving is not pos-

sible, or a problem has
occurred.

- Blinking : Emergency driving.

When the ready indicator goes OFF
or blinks, there is a problem with the
system. In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

LKA (Lane Keeping
Assistant) System
Indicator (if equipped)

The LKA indicator will illuminate
when you turn the lane keeping
assistant system on by pressing the
LKA button.
If there is a problem with the system,
the yellow LKA indicator will illumi-
nate.

❈

For more details, refer to “Lane
Keeping Assist (LKA) System” in
chapter 5.

Cruise Indicator Light 
(if equipped)

This indicator light illuminates:

• When the cruise control system is

enabled.

❈

For more details, refer to “Cruise
Control System” in chapter 5.

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments