Driving your vehicle
112
5
LKA system operation
To activate/deactivate the LKA:
With the POWER button in the ON
position, LKA turns on automatically.
The indicator (
) in the cluster
display will initially illuminate white. If
you press the LKA button located on
the instrument panel on the lower
right hand side of the driver, LKA will
be turned off and the indicator on the
cluster display will go off.
The colour of indicator will change
depend on the condition of LKA.
- White : Sensor does not detect
the lane marker or vehicle
speed is less than 60
km/h (37 mph).
- Green : Sensor detects the lane
marker or road edge and
system is able to control
the steering.
LKA system activation
• To see the LKA system screen on
the LCD display in the cluster, Tab
to the ASSIST mode (
).
• For further details, refer to "User
Setting Mode" in chapter 4.
• After LKA system is activated, if
both lane markers or road edge
are detected, vehicle speed is over
60 km/h (37 mph) and all the acti-
vation conditions are satisfied, a
green steering wheel indicator will
illuminate and the steering wheel
will be controlled.
ODEEV058155R
Summary of Contents for NiroEV 2019
