Kia NiroEV 2019 Owner'S Manual Download Page 256

Page: 256 / 623

Features of your vehicle

• The sensing distance whilst mov-

ing forward is approximately 100
cm (39 in.) when you are driving
less than 10 km/h (6.2 mph).

• When more than two objects are

sensed at the same time, the clos-
est one will be recognized first.

• The side sensors are activated

when you shift the gear to the R
(Reverse) position.

• If the vehicle speed is above

20km/h, the system automatically
turns off. To activate again, push
the button.

✽

NOTICE

It may not operate if it’s distance
from the object is already less than
approximately 25 cm when the sys-
tem is ON.

Distance

from object

Warning indicator

Warning sound

When driving

forward

When driving

rearward

100cm~61cm Front

Buzzer beeps

intermittently

120cm~61cm Rear

Buzzer beeps

intermittently

60cm~31cm

Front

Buzzer beeps

frequently

Rear

Buzzer beeps

frequently

30cm

Front

Buzzer sounds

continuously

Rear

Buzzer sounds

continuously

Type of warning indicator and sound

✽

NOTICE

• The actual warning sound and indicator may differ from the illustration

according to objects or sensor status.

• Do not wash the vehicle's sensor with high pressure water.

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NiroEV 2019

Reviews:

Related manuals for NiroEV 2019

Brands by name

Popular brands

Kia NiroEV 2019, Owner'S Manual

Search results

Summary of Contents for NiroEV 2019

Reviews:

Related manuals for NiroEV 2019

Brands by name

Popular brands