manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 559 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 559

Maintenance

46

7

3. Check the removed fuse; replace it

if it is blown. To remove or insert
the fuse, use the fuse puller in the
motor compartment fuse panel.

4. Push in a new fuse of the same

rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorised Kia dealer.

Multi fuse

✽

✽

NOTICE

Do not disassemble nor assemble the
multi fuse when it is secured with
nuts and bolts. Incorrect or partial
assembly torque may cause a fire.
Have the vehicle checked by a pro-
fessional workshop. Kia recom-
mends to consult an authorised Kia
dealer/service partner.

Main fuse

✽

✽

NOTICE

Do not disassemble nor assemble the
multi fuse when it is secured with
nuts and bolts. Incorrect or partial
assembly torque may cause a fire.
Have the vehicle checked by a pro-
fessional workshop. Kia recom-
mends to consult an authorised Kia
dealer/service partner.

CAUTION

Always securely install the fuse
panel cover in the motor com-
partment to protect against
electrical failure which may
occur from water contact.
Listen for the audible clicking
sound to ensure fuse panel
cover is securely fastened.

ODEEV078076R

ODEEV078077R

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments