manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual

Introducing the Kia NiroEV 2019, an eco-friendly and powerful electric vehicle designed to revolutionize your driving experience. Unlock all the features and functionalities by downloading the free Owner's Manual from our manualshive.com, ensuring you have easy access to important information and maintenance guidelines for your NiroEV.

Share
Download
background image

5 155

Driving your vehicle

VEHICLE WEIGHT

This section will guide you in the
proper loading of your vehicle and/or
trailer, to keep your loaded vehicle
weight within its design rating capa-
bility, with or without a trailer. Properly
loading your vehicle will provide max-
imum return of the vehicle design
performance. Before loading your
vehicle, familiarize yourself with the
following terms for determining your
vehicle's weight ratings, with or with-
out a trailer, from the vehicle's speci-
fications and the certification label:

Base kerb weight 

This is the weight of the vehicle
including a full tank of fuel and all
standard equipment. It does not
include passengers, cargo, or option-
al equipment.

Vehicle kerb weight

This is the weight of your new vehicle
when you picked it up from your deal-
er plus any aftermarket equipment.

Cargo weight

This figure includes all weight added
to the Base Kerb Weight, including
cargo and optional equipment.

GAW (Gross axle weight)

This is the total weight placed on
each axle (front and rear) - including
vehicle kerb weight and all payload.

GAWR 
(Gross axle weight rating)

This is the maximum allowable
weight that can be carried by a single
axle (front or rear). These numbers
are shown on the certification label.
The total load on each axle must
never exceed its GAWR.

GVW (Gross vehicle weight)

This is the Base Kerb Weight plus
actual Cargo Weight plus passengers.

GVWR 
(Gross vehicle weight rating)

This is the maximum allowable
weight of the fully loaded vehicle
(including all options, equipment,
passengers and cargo). The GVWR
is shown on the certification label.

Overloading

WARNING 

- Vehicle

weight

The gross axle weight rating
(GAWR) and the gross vehicle
weight rating (GVWR) for your
vehicle are on the certification
label attached to the driver's (or
front passenger’s) door.
Exceeding these ratings can
cause an accident or vehicle
damage. You can calculate the
weight of your load by weighing
the items (and people) before
putting them in the vehicle. Be
careful not to overload your
vehicle.

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NiroEV 2019

Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Brand: Trailboss Pages: 8

Brands by name

Popular brands

Load more brands