manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 399 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 399

Driving your vehicle

74

5

3. Move the lever down (to SET-),

and release it at the desired
speed. The cruise set indicator
light will illuminate. Release the
accelerator pedal at the same
time. The desired speed will auto-
matically be maintained.

On a steep grade, the vehicle may
slow down or speed up slightly whilst
going downhill.

To increase cruise control set
speed:

Follow either of these procedures:
• Move the lever up (to RES+) and

hold it. Your vehicle will accelerate.
Release the lever at the speed you
want.

• Move the lever up (to RES+) and

release it immediately. The cruising
speed will increase by 2 km/h (1
mph) each time you move the lever
up (to RES+) in this manner.

To decrease the cruising
speed:

Follow either of these procedures:
• Move the lever down (to SET-) and

hold it. Your vehicle will gradually
slow down. Release the lever at the
speed you want to maintain.

• Move the lever down (to SET-) and

release it immediately. The cruising
speed will decrease by 2 km/h (1
mph) each time you move the lever
down (to SET-) in this manner.

ODE056036L

ODE056037L

ODE056036L

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments