Kia NiroEV 2019 Owner'S Manual Download Page 430

Page: 430 / 623

5 105

Driving your vehicle

1. Press the

/ CRUISE button, to

turn the system on. The CRUISE
indicator in the instrument cluster
will illuminate.

2. Accelerate to the desired speed.

The smart cruise control speed

can be set as follows:
• 10 km/h (5 mph) ~ 160 km/h

(100 mph): when there is no
vehicle in front

• 0 km/h (0 mph) ~ 160 km/h (100

mph): when there is a vehicle in
front

3. Move the lever down (to SET-),

and release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LCD
screen will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-
cally be maintained.

Once the system starts working, the
indicator light (

) comes on the

instrument panel.
The indicator light colours according
to the system status are as follows.
- Green: Active
- White: Standby

For more SCC settings and details
refer to <Smart Cruise Control>.

ODE056039L

ODE056040L

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NiroEV 2019

Reviews:

Related manuals for NiroEV 2019

Brands by name

Popular brands

Kia NiroEV 2019, Owner'S Manual

Search results

Summary of Contents for NiroEV 2019

Reviews:

Related manuals for NiroEV 2019

Brands by name

Popular brands