Keysight N9038A, Service Manual

Page: 106 / 745

106 Keysight N9038A MXE Service Guide
Instrument Messages
Event Messages
–130
Suffix error
A problem was found in a suffix (units). The exact problem cannot be
specifically identified
–131
Invalid suffix
There is a syntax problem with the suffix. You need to use the suffix (units) that
are allowed by this command
–134
Suffix too long
The suffix contained more than twelve characters
–138
Suffix not allowed
A suffix was found after a numeric element that does not allow suffixes (units)
–140
Character data error
A problem was found with a character data element. The exact problem cannot
be specifically identified
–141
Invalid character
data
Either the character data element contains an invalid character or the element
itself is not valid for this command
–144
Character data too
long
The character data element contains more than twelve characters
–148
Character data not
allowed
A character data element that you sent is valid, but it is not allowed at this point
in the parsing
–150
String data error
A problem was found with a string data element. The exact problem cannot be
specifically identified
–151
Invalid string data
A string type of data element was expected, but it is invalid for some reason.
For example, an END message was received before the terminal quote
character
–158
String data not
allowed
A string data element that you sent is valid, but it is not allowed at this point in
the parsing
–160
Block data error
A problem was found with a block data element. The exact problem cannot be
specifically identified
–161
Invalid block data
A block data element was expected, but it was invalid. For example, an END
message was received before the end length was satisfied
–168
Block data not
allowed
A legal block data element was found, but it is not allowed at this point in the
parsing
–170
Expression error
A problem was found with an expression data element. The exact problem
cannot be specifically identified
–171
Invalid expression
An expression data element is not valid. For example, there may be unmatched
parentheses or an illegal character
–178
Expression data not
allowed
A legal expression data was found, but it is not allowed at this point in the
parsing
–180
Macro error
A problem was found with a macro element. The exact problem cannot be
specifically identified
–181
Invalid outside macro
definition
Indicates that a macro parameter placeholder was encountered outside of a
macro definition
Err# Message Verbose/Correction Information