Keysight E3633A, User Manual

Page: 66 / 205

3 Front-Panel Operation
66 Keysight E3633A and E3634A User’s Guide
– Adjust OCP trip level
1 Raise the OCP trip level.
Press key and turn the knob to raise the OCP trip level.
2 Move to the OCP CLEAR mode.
Press the key to move to the OCP CLEAR mode. The “OCP ON” message
appears on the display. Turn the knob to the right until the above message
appears on the display.
3 Clear the overcurrent condition and exit this menu.
Now, when you press again, the “DONE” message is displayed for a
second and the OCP annunciator will not blink any more. The output will
return the meter mode.
– Remote interface operation:
OCP CLEAR
CURR:PROT {<current>|MIN|MAX}
Set the OCP level
CURR:PROT:STAT {OFF|ON}
Disable or enable the OCP circuit
CURR:PROT:CLE
Clear the tripped OCP circuit