Front-Panel Operation
3
Keysight E3633A and E3634A User’s Guide
65
– Adjust output current level
1 Lower the output current level.
Press
key and set the knob for
current
control by pressing
key
then lower the output current level below the OCP trip point.
2 Move to the clear mode.
Press
key twice to move to the OCP CLEAR mode. The “OCP ON”
message appears on the display. Turn the knob to the right until the above
message appears on the display
3 Clear the overcurrent condition and exit this menu.
Now, when you press
key again, the “DONE” message is displayed for
a second and the
OCP
annunciator will not blink any more. The output will
return to meter mode. The knob is selected for
current
control.
Notice that the power supply is operated in the constant current (CC)
mode.
OCP
CLEAR
Summary of Contents for E3633A
