Kenwood TKR-750 Programming Reference Manual Download Page 17

Page: 17 / 83

Version: 1.01

Field Programming Reference (FPRG)

4 FILE MENU

Confirm the check box of the configuration data item
that you want to print.

Figure 4-8 File_Print_3

Note:

The “Model” check box and the “Embedded Message”
check box are checked as default configuration.

Click “OK”.

You can print out the “KENWOOD KPG-91D Radio
Programming Information”.

(Refer to 4.6 Print

Preview.)

4.5.1

Print Out List

Model

The Configured “Model Information” is printed.

(Refer to 5.1 Model Information.)

Optional Features

The Configured “Optional Features” parameters are
printed.

(Refer to 6.4 Optional Features Window.)

Key Assignment

The Configured “Key Assignment” parameters are
printed.

(Refer to 6.5 Key Assignment Window.)

Scan Information

The configured “Scan Information” parameters are
printed.

(Refer to 6.6 Scan Information Window.)

DTMF

The configured “DTMF” parameters are printed.

(Refer to 6.7 DTMF Window.)

Encode/Decode Table

The configured “Encode/Decode Table” parameters
are printed.

(Refer to 6.8 “Encode/Decode Table”

Window.)

Remote Control

The configured “Remote Control parameters are
printed.

(Refer to 6.9 Remote Control Window.)

Function Port

The configured “Function Port” parameters are
printed.

(Refer to 6.10 Function Port Window.)

Range

Checked

The Model Information parameters
will be printed out.

Unchecked

The Model Information parameters
will not be printed out.

Default

Checked

Range

Checked

The “Optional Features”
parameters will be printed out.

Unchecked

The “Optional Features”
parameters will not be printed out.

Default

Unchecked

Range

Checked

The “Key Assignment” parameters
will be printed.

Unchecked

The “Key Assignment” parameters
will not be printed out.

Default

Unchecked

Range

Checked

The “Scan Information” parameters
will be printed.

Unchecked

The “Scan Information” parameters
will not be printed out.

Default

Unchecked

Range

Checked

The “DTMF” parameters will be
printed out.

Unchecked

The “DTMF” parameters will not be
printed out.

Default

Unchecked

Range

Checked

The “Encode/Decode Table”
parameters will be printed out.

Unchecked

The “Encode/Decode Table”
parameters will not be printed out.

Default

Unchecked

Range

Checked

The “Remote Control” parameters
will be printed out.

Unchecked

The “Remote Control” parameters
will not be printed out.

Default

Unchecked

Range

Checked

The “Function Port” parameters will
be printed out.

Unchecked

The “Function Port” parameters will
not be printed out.

Default

Unchecked

Summary of Contents for TKR-750




















































































Search results

Summary of Contents for TKR-750

Reviews:

Related manuals for TKR-750

Brands by name

Popular brands

Kenwood TKR-750, Programming Reference Manual

Search results

Summary of Contents for TKR-750

Reviews:

Related manuals for TKR-750

Brands by name

Popular brands