Kenwood TKR-750 Programming Reference Manual Download

Page: 71 / 83

Version: 1.01

Field Programming Reference (FPRG)

9 SETUP MENU

9.1

Communication Port
Window

It can select the COM port to communicate with the TKR-
750/850/751/851.

When there is only one available Communication port on
a PC, the port is automatically configured as COM1.

The “Communication Port” window appears when
selecting “Communication Port” in the “Setup” menu.

Figure 9-1 Communication Port window

Select the Communication Port from COM1 - COM20 and
click “OK”.

9.2

Language File Setup
Window

It can select the language on “Language File Setup”
window.

Figure 9-2 “Language File Setup” window

From the dropdown list, Select the language.

Note:

The selected language in the “Language File Setup” window
is applied to all KPG-91D software functions.

Range

Dutch, English, French, German, Italian,
Spanish

Default

The language selected when installing the
software appears.

Summary of Contents for TKR-750




















































































Search results

Summary of Contents for TKR-750

Reviews:

Related manuals for TKR-750

Brands by name

Popular brands

Kenwood TKR-750, Programming Reference Manual

Search results

Summary of Contents for TKR-750

Reviews:

Related manuals for TKR-750

Brands by name

Popular brands