manualshive.com logo in svg

Kenwood TKR-750, Programming Reference Manual

The Kenwood TKR-750 user manual provides essential modification information for optimal usage. Download this valuable manual for free from our website, where we host a vast collection of user manuals available for instant download. Enhance your experience with the TKR-750 and unlock its full potential with ease.

Share
Download
background image

Version: 1.01

Field Programming Reference (FPRG)

63

7 PROGRAM MENU

Table 7-2 Functions that you can adjust in PC Tuning Mode

Function

Wide/

Narrow

Description

Signalling

Reception 
Frequency

-

You can adjust the VCO frequency during reception.
TKR-750/751 (VHF): Single Reference Level Adjustment
TKR-850/851 (UHF): Single Reference Level Adjustment

Reception 
Frequency 
(Low)

-

You can adjust the VCO frequency during reception.
TKR-750/751 (VHF) only: Single Reference Level Adjustment
You can make the adjustment in steps of 2.5 kHz.

Reception 
Frequency 
(High)

-

You can adjust the VCO frequency during reception.
TKR-750/751 (VHF) only: Single Reference Level Adjustment
You can make the adjustment in steps of 2.5 kHz.

Transmission 
Frequency

-

You can adjust the VCO frequency during transmission.
TKR-750/751 (VHF): Single Reference Level Adjustment
TKR-850/851 (UHF): Single Reference Level Adjustment

Transmission 
Frequency 
(Low)

-

You can adjust the VCO frequency during transmission.
TKR-750/751 (VHF) only: Single Reference Level Adjustment
You can make the adjustment in steps of 2.5 kHz.

Transmission 
Frequency 
(High)

-

You can adjust the VCO frequency during transmission.
TKR-750/751 (VHF) only: Single Reference Level Adjustment
You can make the adjustment in steps of 2.5 kHz.

Squelch Tight

Wide

You can adjust the Squelch Level 15.
Single Reference Level Adjustment

Narrow

Squelch 
Open

Wide

You can adjust the Squelch Level 1.
Single Reference Level Adjustment
The TKR-750/850/751/851 stores the RSSI Level at the same time.

Narrow

RD (RX 
Detector 
Output) 
Level

Wide

You can adjust the RD (RX Detector Signal Output) level.
Single Reference Level Adjustment

Narrow

RA (RX Audio 
Output)
Level

Wide

You can adjust the RA (RX Audio Signal Output) level.
Single Reference Level Adjustment

Narrow

TX High 
Power

-

You can adjust the TX High Power level.
High Power: 3 Reference Level Adjustments

TX Low 
Power

-

You can adjust the TX Low Power level.
Low Power: 3 Reference Level Adjustments

Power Down 
Detect (High)

-

You can configure the threshold level to detect the degradation of the output power while 
transmitting in High Power mode.
Single Reference Level Adjustment

Power Down 
Detect (Low)

-

You can configure the threshold value to detect the degradation of the output power while 
transmitting in Low Power mode.
Single Reference Level Adjustment

Max 
Deviation

Wide

You can adjust the Maximum Deviation level.
TKR-750/751 (VHF): 6 Reference Level Adjustments (3 Reference levels for VCO A and B)
TKR-850/851 (UHF): 3 Reference Level Adjustments

Narrow

DQT Balance

Wide

You can adjust the DQT Encode balance.
TKR-750/751 (VHF): 2 Reference Level Adjustments
TKR-850/851 (UHF): Single Reference Level Adjustment

Sig CH = 2

Narrow

TD (Ext. 
Signalling)
Deviation

Wide

You can adjust the TD (external signalling) level.
TKR-750/751 (VHF): 2 Reference Level Adjustments
TKR850/-851 (UHF): Single Reference Level Adjustment

Narrow

TA (TX 
Audio) 
Deviation

Wide

You can adjust the TA (TX Audio) level.
TKR-750/751 (VHF): 2 Reference Level Adjustments
TKR-850/851 (UHF): Single Reference Level Adjustment

Narrow

Summary of Contents for TKR-750




















































































Reviews:

No comments

Related manuals for TKR-750

Radwin 5000 Configuration Manual preview
5000
Brand: Radwin Pages: 252
Radwin 5000 Reference Manual preview
5000
Brand: Radwin Pages: 6
Magnavox AJ3840 Specifications preview
AJ3840
Brand: Magnavox Pages: 2
Cambridge SoundWorks SoundWorks Radio 820HD Connection Manual preview
SoundWorks Radio 820HD
Brand: Cambridge SoundWorks Pages: 12
Nady Audio MC-12 Instruction Sheet preview
MC-12
Brand: Nady Audio Pages: 2
Ubiquiti airFiber 5 Quick Start Manual preview
airFiber 5
Brand: Ubiquiti Pages: 33
C. Crane CC Witness Instruction Manual preview
CC Witness
Brand: C. Crane Pages: 36
Technika DAB-124 Owner'S Handbook Manual preview
DAB-124
Brand: Technika Pages: 20
Hama BR-Klassik DIR3121M Manual preview
BR-Klassik DIR3121M
Brand: Hama Pages: 45
Furuno FA-40 Setup Manual preview
FA-40
Brand: Furuno Pages: 4
Crystal DBH10R User Manual preview
DBH10R
Brand: Crystal Pages: 10
MicroAir Avionics T2000UAV-L Installation And User Manual preview
T2000UAV-L
Brand: MicroAir Avionics Pages: 24
Eaton SQG3 Series Technical Data preview
SQG3 Series
Brand: Eaton Pages: 2
Grundig GKR3010 Manual preview
GKR3010
Brand: Grundig Pages: 15
MAJORITY Eversden Instruction Manual preview
Eversden
Brand: MAJORITY Pages: 31
Pfannenberg DS-SIL series Instruction Manual/Safety Manual preview
DS-SIL series
Brand: Pfannenberg Pages: 52
JRC ALPHATRON Marine AlphaRiverTrackPilot User Manual preview
ALPHATRON Marine AlphaRiverTrackPilot
Brand: JRC Pages: 22
Vertex Standard VX-4500 Series Service Manual preview
VX-4500 Series
Brand: Vertex Standard Pages: 45

Brands by name

Popular brands

Load more brands