Kenwood TKR-750 Programming Reference Manual Download | Manualshive

Page: 43 / 83

background image

Field Programming Reference (FPRG)

38

6 EDIT MENU

Note:

The level detection for the auxiliary input port is performed
even if the PF key is pressed during the detection when the
Auxiliary input port is active. In this case, the Key Input Error
Tone sounds and the function assigned to the PF key does
not operate. (Refer to FUNC 9 Tone,

Refer to Table 6.10.2

)

Multi-table

Main/Sub

It can toggle between Main and Sub for the signalling specified by the Multi-table Select by pressing the PF
key.

(Refer to 6.10.1 AUX Select Tab.)

QT/DQT Decode

Disable/Enable

It can disable/enable QT/DQT Decode function by pressing the PF key.

QT/DQT Encode

Disable/Enable

It can disable/enable QT/DQT Encode function by pressing the PF key.

Repeat Disable/Enable

It can disable/enable the repeat operation by pressing the PF key.
It does not allow to configure this function if no channel is configured to the repeat operation.

Reset

The operation of the TKR-750/850/751/851 is reset and it returns to the default when pressing the PF key.

Scan On/Off

It can enable/disable the Scan function by pressing the PF [Scan On/Off] key.

Scrambler On/Off

It can enable/disable Scrambler by pressing the PF [Scrambler On/Off] key.

Squelch On/Off

It can disable/enable Squelch by pressing the PF [Squelch On/Off] key.

Squelch Momentary

It can disable Squelch while pressing the PF [Squelch Momentary] key.

Take Over On/Off *1

It can enable/disable the control from an external device by pressing the PF [Take Over On/Off] key.

Test Tone On/Off

It can enable/disable Test Tone function by pressing the PF [Test Tone On/Off] key.

TOT Disable/Enable

It can enable/disable Time-out Timer by pressing the PF [TOT Disable/Enable] key.

TX Disable/Enable

It can restrict/permit all transmissions by pressing the PF [TX Disable/Enable] key.

*1: When the control from the external device is enabled by pressing the PF [Take Over On/Off] key, you cannot control the external Monitor, the

external PTT, the Auxiliary Input port, and the Auxiliary I/O (In) port. However, the Auxiliary Out port and the Auxiliary I/O (Out) port works.

Function Name

Description

«
...
41
42
43
44
45
...
»

Summary of Contents for TKR-750




















































































Reviews:

No comments

Related manuals for TKR-750

Brand: Sangean Pages: 1

Brand: Majestic Pages: 22

Brand: LST Pages: 3

HD Radio HDR-14

Brand: Sangean Pages: 24

Brand: Humminbird Pages: 68

Brand: Pfannenberg Pages: 12

Brand: Hawkeye Mfg Pages: 9

Bearcat 980 SSB

Brand: Uniden Pages: 24

Brand: GPX Pages: 2

Brand: iLive Pages: 2

Brand: BC Pages: 19

Brand: Furuno Pages: 89

Brand: NAVICOM Pages: 15

Brand: Navico Pages: 53

Brand: Vertex Standard Pages: 79

Brand: Bosch Pages: 7

Brand: iHome Pages: 8

Brand: iHome Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands