Kenwood TKR-750, Programming Reference Manual

Page: 8 / 83

Version: 1.01 Field Programming Reference (FPRG) 3
2 BASIC OPERATION
This section describes basic operations of the KPG-91D.
Note:
!
The TKR-750/850 automatically enters PC mode when reading
or writing the programming data. (Refer to FUNC 1.5 Mode.)
!
We recommend you storing the data configured by the KPG-91D
to the hard disc or the external storage device.
(Refer to 4 FILE
MENU.)
2.1 Starting and Exiting
Select “Start” > “All programs” > “KENWOOD FPU” >
“KPG-91D” in order to start the KPG-91D.
Note: You can start the KPG-91D by opening the folder in which
you installed the KPG-91D and double-clicking the
“kpg91d.exe” file.
The Main window of the KPG-91D appears.
The splash logo appears in the center of the screen for a
while and it automatically disappears. You can also make
the logo disappear by pressing any key on the keyboard
or clicking a mouse button.
Select “File” > “Exit” to exit the KPG-91D.
2.2 Initializing the window
Select the model type to configure. (Refer to 5 MODEL
MENU.)
Model name, model type, frequency bandwidth, and data
file name appear on the title bar located on the top of the
window.
2.3 Write the Configuration Data
Follow the procedures below to edit and write the
configuration data.
1. Enter all the necessary data.
Select the item that you want to configure in the “Edit”
menu and enter data in the window.
(Refer to 6 EDIT
MENU.)
2. Write the updated data to the repeater.
Select “Program” > “Write Data to Repeater”. (Refer to
7 PROGRAM MENU.)
2.4 Modify the Configuration
Data
Follow the procedures below to edit and write the
configuration data.
1. Read the configuration data from the TKR-750/850.
Select “Program” > “Read Data from Repeater”.
(Refer to 7 PROGRAM MENU.)
2. Edit the data on the computer.
Select the item that you want to edit in the “Edit” menu
and enter data in the window.
(Refer to 6 EDIT
MENU.)
3. Write the updated data to the TKR-750/850.
Select “Program” > “Write Data to Repeater”. (Refer to
7 PROGRAM MENU.)
2.5 Edit the stored Data and
Write
Follow the procedures below to edit and write the
configuration data.
1. Open the configuration data stored in the hard disk
drive or other storage devices.
Select “File” > “Open”. (Refer to 4 FILE MENU.)
2. Edit the file data on the computer.
Select the item that you want to edit in the “Edit” menu
and enter data in the window.
(Refer to 6 EDIT
MENU.)
3. Write the updated data to the TKR-750/850.
Select “Program” > “Write Data to Repeater”. (Refer to
7 PROGRAM MENU.)
2.6 Display Help
Click “Help” located on each window to open the “KPG-
91D HTML Help” window.
(Refer to 12 HELP MENU.)