manualshive.com logo in svg

Kenwood TKR-750, Programming Reference Manual

The Kenwood TKR-750 user manual provides essential modification information for optimal usage. Download this valuable manual for free from our website, where we host a vast collection of user manuals available for instant download. Enhance your experience with the TKR-750 and unlock its full potential with ease.

Share
Download
background image

6 EDIT MENU

51

Field Programming Reference (FPRG)

Version: 1.01

Low Power On *1

Switch the transmission power from High to Low when the signal is applied to the PF [Low Power Off] input 
port. This function activates only when at least one channel is configured as High Transmission Power. 

(Refer 

to 6.2.11 TX High Power.)

Low Power On/Off*1

Switch High/Low for the transmission power when the signal is applied to the PF [Low Power On/Off] input port. 
This function activates only when at least one channel is configured as High for Transmission Power. 

(Refer to 

6.2.11 TX High Power.)

Monitor Off

It can enable the signalling Decode function when the signal is applied to the PF [Monitor Off] input port.
When the signal is detected with Down Edge, you cannot switch Monitor On after this function is once enabled.
This function does not operate when the repeater enables the repeat operation.

Monitor On

It can disable signalling Decode when the signal is applied to the PF [Monitor On] input port.
When the signal is detected with Down Edge, you cannot switch Monitor Off after this function is once enabled.

Monitor On/Off

Switch disable/enable signalling Decode when the signal is applied to the PF [Monitor On/Off] input port. You 
can use this function only when the signal is detected with Down Edge. 

(Refer to  

"

 AUX Input Trigger (AUX 

Input).)

Multi-table Sub

Switch the signalling specified on the Multi-table Select to the Sub-table signalling when the signal is applied to 
the PF [Multi-table Sub] input port. 

(Refer to 6.10.1 AUX Select Tab.)

When the signal is detected with Down Edge, it cannot switch to the Main-table after the Sub-table is selected.

Multi-table Main

Switch the signalling specified on the Multi-table Select to the Main-table when the signal is applied to the PF 
[Multi-table Main] input port. 

(Refer to 6.10.1 AUX Select Tab.)

When the signal is detected with Down Edge, it cannot switch to the Sub-table after the Main-table is selected.

Multi-table Main/Sub

Switch Main/Sub for the signalling specified with the Multi-table Select when the signal is applied to the PF 
[Multi-table Main/Sub] input port. 

(Refer to 6.10.1 AUX Select Tab.)

QT/DQT Decode 

Disable

Restrict QT/DQT Decode when the signal is applied to the PF [QT/DQT Decode Disable] input port.
When the signal is detected with Down Edge, it cannot switch the QT/DQT Decode function on after this 
function is on.
This function is valid even when the repeater is performing the Repeat operation.

QT/DQT Decode 

Enable

Activate QT/DQT Decode when the signal is applied to the PF [QT/DQT Decode Enable] input port.
When the signal is detected with Down Edge, it cannot switch the QT/DQT Decode function Off after this 
function is on.

QT/DQT Decode 

Disable/Enable

Switch disable/enable QT/DQT Decode when the signal is applied to the PF [QT/DQT Encode Disable/Enable] 
input port.

QT/DQT 

Encode Disable

Restrict QT/DQT Encode when the signal is applied to the PF [QT/DQT Encode Disable] input port.
When the signal is detected with Down Edge, it cannot switch the QT/DQT Encode function On after this 
function is on.

QT/DQT 

Encode Enable

Activate QT/DQT Encode when the signal is applied to the PF [QT/DQT Encode Enable] input port.
When the signal is detected with Down Edge, it cannot switch the QT/DQT Encode function Off after this 
function is on.

QT/DQT 

Encode Disable/Enable

Switch disable/enable QT/DQT Encode when the signal is applied to the PF [QT/DQT Encode Disable/Enable] 
input port.

Repeat Disable

Restrict the Repeat operation when the signal is applied to the PF [Repeat Disable] input port.
It cannot configure this function if no channel is configured to the Repeat operation. When the signal is detected 
with Down Edge, it cannot enable the Repeat operation after this function is enabled.

Repeat Enable

Activate the Repeat operation when the signal is applied to the PF [Repeat Enable] input port.
It cannot configure this function if no channel is configured to the Repeat operation. When the signal is detected 
with Down Edge, it cannot disable the repeat operation after this function is enabled.

Repeat Disable/Enable

Switch disable/enable the repeat operation when the signal is applied to the PF [Repeat Disable/Enable] input 
port. It cannot configure this function if no channel is configured to the Repeat operation.

Reset

Reset the operations and returns to the default value when the signal is applied to the PF [Reset] input port.

Scan Off

It can disable the Scan when the signal is applied to the PF [Scan Off] input port.
When the signal is detected with Down Edge, it cannot enable the Scan after this function is enabled.

Scan On

It can enable the Scan when the signal is applied to the PF [Scan On] input port.
When the signal is detected with Down Edge, it cannot disable the Scan after this function is enabled.

Scan On/Off

Switch Scan On/Off when the signal is applied to the PF [Scan On/Off] input port. 

Scrambler Off

It can disable Scrambler when the signal is applied to the PF [Scrambler Off] input port.
It cannot configure this function when the optional Scrambler board is not installed.
When the signal is detected with Down Edge, it cannot switch Scrambler On after this function is enabled.

Function Name

Description

Summary of Contents for TKR-750




















































































Reviews:

No comments

Related manuals for TKR-750

Magnavox AJ3840 Specifications preview
AJ3840
Brand: Magnavox Pages: 2
B&G V90 Installation Manual preview
V90
Brand: B&G Pages: 29
Radio Shack TRC521 CB Quick Start Manual preview
TRC521 CB
Brand: Radio Shack Pages: 2
Radio Shack 21-1863 Owner'S Manual preview
21-1863
Brand: Radio Shack Pages: 4
Attwood 14060 Installation Instructions preview
14060
Brand: Attwood Pages: 2
SOUNDMASTER WE35 Manual preview
WE35
Brand: SOUNDMASTER Pages: 3
Denver CR-215 Instruction Manual preview
CR-215
Brand: Denver Pages: 13
Blaupunkt CR5WH Owner'S Manual preview
CR5WH
Brand: Blaupunkt Pages: 56
Zodiac MICRO WATERPROOF Manual preview
MICRO WATERPROOF
Brand: Zodiac Pages: 37
Garmin AIS 300 Technical Reference preview
AIS 300
Brand: Garmin Pages: 42
AudioSonic CL-1486 Instruction Manual preview
CL-1486
Brand: AudioSonic Pages: 44
Oceanic Pressure Gauge Owner'S Manual preview
Pressure Gauge
Brand: Oceanic Pages: 2
Galaxy DX 959 Service Manual preview
DX 959
Brand: Galaxy Pages: 35
Datalogic STARGATE Installation Manual preview
STARGATE
Brand: Datalogic Pages: 40
NAVICOM RT-300 Installation And Operation Manual preview
RT-300
Brand: NAVICOM Pages: 15
Navico Simrad RS90S User Manual preview
Simrad RS90S
Brand: Navico Pages: 53
JRC JAN-7202 Instruction Manual preview
JAN-7202
Brand: JRC Pages: 332
Revo Pico Operating Instructions Manual preview
Pico
Brand: Revo Pages: 80

Brands by name

Popular brands

Load more brands