DoP0018
3. Connection details
1. Mounting base
2. Sounder/beacon assembly
Table 1. Specification
Supply voltage (conventional) 18~35 Vdc
Cable size/type
0.5~2.5mm
2
/FIRETUF, FP200 or MICC
Current (high volume)
11mA
Current (low volume)
8.7mA
Sound output (high volume)* 90 +/- 3dB(A) : All tones
Sound output (low volume)*
80 +/- 3dB(A) : All tones
Operating temperature
-10 to +55ºC ( 93% ± 3%RH )
Material
ABS FR plastic
Environmental category
Type A= IP21C
Tones
3, see section 4.
Flash rate
0.5Hz
Feature
Value
Feature
Value
SQG3-23 Base sounder VAD
Comp liance EN54-3; EN54-23:2 010
14
OUT IN
SCREEN
ZONE OUT
ZONE IN
+VE -VE
+VE -VE
ZONE OUT
ZONE IN
Note
Screen must be continuous
along entire length of line.
50
60
70
80
(i) Knockout the required
fixing holes.
(ii) Fix to mounting surface
using two suitable screws.
(iii) Please ensure all cable
entry points are sealed
appropriately.
If the base deforms on an
uneven surface, loosen the
screws or move to a flatter
position.
Flash on period
60ms
Note
Technical data
Effective July 2019
SQG3-23
25-12947-E
