7. Dimensions
6. Fitting detector
5. VAD coverage area
4. Switch position meaning
Technical data
Effective July 2019
1, Sounder on/off (AV version only)
2, Volume high (off)/low (on)
3, Tones
4, Tones
5, Mode: On = N/A* Off = Conventional
*Switch 5 must be set to ‘Off’ in order to operate
Continuous: 3=On, 4=On (910Hz)
Bell: 3=On, 4=Off (1440 Hz)
Alternating: 3=Off, 4=On (610/910 Hz)
{
30mm
Ø
114mm
1
2
3
4
5
1
On
Off
Ceiling mounted
3D view
Cross section
plane
Product
SQG3-23
0.45
0.80
0.90
1.70
1.40
0.90
(i) Use M4 screw to attach
the detector to the sounder.
Note
Length to be determined by installer.
Base shown for illustration purposes only.
Cross section
view (metres)
Manufactured By
Eaton Electrical Products Ltd
Llantarnam Park, Cwmbran, Gwent, NP44 3AW, UK
Tel: +44 (0)1633 628 500
Fax:+44 (0)1633 866 346
www.eaton.com
Made in the UK
Eaton Industries Manufacturing GmbH
Electrical Sector EMEA
Route de la Longeraie 7
1110 Morges, Switzerland
Eaton.eu
2019 Eaton All rights reserved July 2019
©
Notes.
The devices have no serviceable component so no maintenance
is required.
*For full tone and polar node SPL data please refer to M14-003.
