6 EDIT MENU
37
Field Programming Reference (FPRG)
6.5
Key Assignment Window
You can assign functions to each PF key on the “Key
Assignment” window.
Figure 6-12 Key Assignment window
Select the function to assign to the PF key.
Note:
The PF key of the front panel displayed on the “Key
Assignment” window lights red when the PF key is selected.
When the Channel Up function is assigned to the PF1
key, the PF1 key is referred to as “PF [Channel Up] key”.
Table 6-3 Assigning functions to the PF Keys
Range
Refer to Table 6-3 Assigning functions to the PF
Keys.
Default
PF1 Key: None
PF2 Key: Repeat Disable/Enable
PF3 Key: TX Disable/Enable
PF4 Key: Take Over On/Off
PF5 Key: Monitor On/Off
PF6 Key: Channel Up
Function Name
Description
None
The TKR-750/850/751/851 does not perform any operation.
AUX Out 1 On/Off
-
AUX Out 5 On/Off
It can enable/disable the function assigned to the Auxiliary output port by pressing one of the PF keys.
You can assign this function when “Selectable” is configure to the Auxiliary Output 1 to Auxiliary Output 5
ports.
(Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
AUX I/O 1 On/Off
-
AUX I/O 6 On/Off
It can enable/disable the function assigned to the Auxiliary I/O port by pressing one of the PF keys.
You can assign the function when “Selectable” is configured to the Auxiliary I/O 1 to Auxiliary I/O 6 ports.
(Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
Channel 1
-
Channel 16
The TKR-750/850/751/851 moves to the channel from one of CH 1 to CH 16 channels.
You cannot configure this function when “Channel Select” is configured to Auxiliary I/O ports 1 - 4. “E2”
appears on the display when specifying the channel without data.
(Refer to 6.10.1 AUX Select Tab.)
Channel Down
The TKR-750/850/751/851 moves to the next lower channel.
The channel without data is skipped.
Channel Up
The TKR-750/850/751/851 moves to the next higher channel.
The channel without data is skipped.
CW ID On
The TKR-750/850/751/851 sends the CW ID.
This function is available on the channel having the CW ID.
CW Message 1
-
CW Message 8
The TKR-750/850/751/851 sends one of CW Message 1 to CW Message 8.
DC Power Save On/Off It can enable/disable Power Saver Mode.
(Refer to 6.4.3 Others Tab (Optional Features).)
Display On/Off
It can switch the panel LED On/Off.
This function is enabled only when the TKR-750/850/751/851 is in Power Saver Mode.
Hold Time Disable/
Enable
It can disable/enable the Repeat Hold Time.
You can configure this function only when at least one channel is configured as the Repeat for Operation
mode and the Repeat Hold Time is enabled.
(Refer to 6.4.1 Optional Features 1 Tab.)
Local TX
Disable/Enable
It can disable/enable the transmissions by the Local Mic PTT.
Low Power On/Off
It can switch High or Low for the transmission power.
This function activates only when at least one channel is configured as High for TX Power.
Monitor On/Off
It can disable/enable the signalling Decode function.
Monitor Momentary
The TKR-750/850/751/851 activates the Monitor function while pressing the PF key.
Summary of Contents for TKR-750
Page 2: ......
Page 64: ...6 EDIT MENU 59 Field Programming Reference FPRG Version 1 01 ...
Page 79: ......
Page 83: ......
