Keithley 2606B System SourceMeter, Reference Manual

Page: 627 / 756

2606B System SourceMeter® Instrument Reference Manual Section 7: TSP command reference
2606B-901-01 Rev. B / May 2018 7-343
trigger.blender[N].stimulus[M]
This attribute specifies the events that trigger the blender.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes Restore configuration
Instrument reset
Power cycle
Trigger blender N reset Configuration script trigger.EVENT_NONE
Usage
eventID = trigger.blender[ N ].stimulus[ M ]
trigger.blender[ N ].stimulus[ M ] = eventID
eventID
The event that triggers the blender action; see Details
N
An integer representing the trigger event blender (up to six)
M An integer representing the stimulus index (1 to 4)
Details
There are four stimulus inputs that can each select a different event. The
eventID
parameter can be
the event ID of any trigger event.
Use zero to disable the blender input.
The
eventID
parameter may be one of the existing trigger event IDs shown in the following table.
Trigger event IDs*
Event ID Event description
smu X .trigger.SWEEPING_EVENT_ID Occurs when the source-measure unit (SMU) transitions
from the idle state to the arm layer of the trigger model
smu X .trigger.ARMED_EVENT_ID Occurs when the SMU moves from the arm layer to the
trigger layer of the trigger model
smu X .trigger.SOURCE_COMPLETE_EVENT_ID Occurs when the SMU completes a source action
smu X .trigger.MEASURE_COMPLETE_EVENT_ID Occurs when the SMU completes a measurement action
smu X .trigger.PULSE_COMPLETE_EVENT_ID Occurs when the SMU completes a pulse
smu X .trigger.SWEEP_COMPLETE_EVENT_ID Occurs when the SMU completes a sweep
smu X .trigger.IDLE_EVENT_ID Occurs when the SMU returns to the idle state
digio.trigger[ N ].EVENT_ID Occurs when an edge is detected on a digital I/O line
tsplink.trigger[ N ].EVENT_ID Occurs when an edge is detected on a TSP-Link line
lan.trigger[ N ].EVENT_ID Occurs when the appropriate LXI trigger packet is
received on LAN trigger object
N
display.trigger.EVENT_ID Occurs when the TRIG key on the virtual front panel is
pressed
trigger.EVENT_ID
Occurs when a
*TRG
command is received on the remote
interface
USB only: Occurs when a USBTMC TRIGGER message
is received
VXI-11 only: Occurs with the VXI-11 command
device_trigger
; reference the VXI-11 standard for
additional details on the device trigger operation