Keithley 2606B System SourceMeter, Reference Manual

Page: 340 / 756

Section 7: TSP command reference 2606B System SourceMeter® Instrument Reference Manual
7-56 2606B-901-01 Rev. B / May 2018
Details
Setting the pulse width to zero (0) seconds asserts the trigger indefinitely. To release the trigger line,
use
digio.trigger[ N ].release()
.
Example
digio.trigger[4].pulsewidth = 20e-6 Sets the pulse width for trigger line 4 to
20
μs.
Also see
digio.trigger[N].assert() (on page 7-52)
digio.trigger[N].reset() (on page 7-56)
digio.trigger[N].release() (on page 7-56)
digio.trigger[N].release()
This function releases an indefinite length or latched trigger.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
digio.trigger[ N ].release()
N Digital I/O trigger line (1 to 14)
Details
Releases a trigger that was asserted with an indefinite pulsewidth time. It also releases a trigger that
was latched in response to receiving a synchronous mode trigger. Only the specified trigger line is
affected.
Example
digio.trigger[4].release() Releases digital I/O trigger line 4.
Also see
digio.trigger[N].assert() (on page 7-52)
digio.trigger[N].pulsewidth (on page 7-55)
digio.trigger[N].reset()
This function resets trigger values to their factory defaults.
Type TSP-Link accessible
Affected by Where saved Default value
Function Yes
Usage
digio.trigger[ N ].reset()
N Digital I/O trigger line (1 to 14)