Keithley 2606B System SourceMeter, Reference Manual

Page: 54 / 756

Section 2: General operation 2606B System SourceMeter® Instrument Reference Manual
2-30 2606B-901-01 Rev. B / May 2018
The following table contains descriptions of the main menu options and cross-references to related
information. To access a menu option, press the
MENU key, turn the navigation wheel to move the
cursor to select an item, and press the navigation wheel .
Menu selection Description For more information, see:
SCRIPT Saves and recalls user scripts Manage scripts (on page 6-3)
- LOAD Loads scripts into nonvolatile memory
- SAVE Saves scripts
SETUP
Saves and recalls user and factory setup
options Saved setups (on page 2-52)
- SAVE Saves user setup options
- RECALL Recalls user setup options
- POWERON Sets the configuration used during startup
LAN Configures the local area network (LAN) LAN concepts and settings (on page
C-1)
- STATUS Displays LAN connection status
- CONFIG Configures the LAN IP address and gateway
- APPLY_SETTINGS
Applies changes made using the CONFIG
menu
- RESET Restores the default settings
- ENABLE Enables and disables the LAN interface
TSPLINK
Configure the instrument in a TSP-Link
®
network
TSP-Link system expansion interface
(on page 6-46)
- NODE Selects the instrument node identifier
- RESET Resets the TSP-Link network
UPGRADE Upgrades the firmware from a USB flash drive Upgrading the firmware (on page A-2)
DIGOUT
Controls digital outputs Digital I/O (on page 3-78)
- DIG-IO-OUTPUT Selects the digital I/O values
- WRITE-PROTECT Write-protects specific digital I/O lines
BEEPER Controls the key beeps General operation (on page 2-1)
- ENABLE Enables the key beeps
- DISABLE Disables the key beeps
LINE-FREQ Configures the line frequency General operation (on page 2-1)
- 50Hz Set the line frequency to 50 Hz
- 60Hz Set the line frequency to 60 Hz
- AUTO Enables automatic line frequency detection
during start up
SYSTEM-INFO Displays the system information General operation (on page 2-1)
- FIRMWARE Displays the version of firmware installed
- SERIAL# Displays the serial number of the unit
- CAL Displays the last calibration date
- MEMORY-USAGE Displays memory usage in percentage
RESET-PASSWORD Resets the system password Password management (on page 6-
34)
Configuration menus
The configuration menu structure is summarized in the following figure and table. For directions on
navigating the menu, see
Menu navigation (on page 2-28). For other menu items, see Main menu (on
page 2-29).