![background image](http://html2.mh-extra.com/html/keithley/2182/2182_user-manual_3982763282.webp)
D-4
Model 182 Emulation Commands
T4
Multiple on X
T5
One-shot on X
T6
Multiple on external
T7
One-shot on external
T8
Multiple on manual (TRIG key) or bus H0X
T9
One-shot on manual (TRIG key) or bus H0X
T10
Disable all triggers
Alternate Output
U0
Send machine status
9
U1
Send error conditions
U2
Send firmware revision
U3
Send buffer length
U4
Send buffer average
U5
Send buffer standard deviation
U6
Send reading relative value
U7
Send analog output relative value
U8
Send analog output gain value
U9
Send trigger interval
U10
Send trigger delay
U12
Send calibration lock status
U13
Send Model 181-like machine status
Analog Output
V0,gain
Analog output gain (0.001 to 999999.999)
10
Trigger Delay
W0
Disable trigger delay
Wvalue
Enable trigger delay; delay = value (1msec to
999999msec)
Execute
X
Execute other device-dependent commands
Terminators
Y0
<CR LF>
Y1
<LF CR>
Y2
<CR>
Y3
<LF>
Y10
<CR LF>
Y13
<LF CR>
Reading Relative
Z0
Disable reading relative
11
Z1
Enable reading relative using next reading
Z2,value
Enable reading relative using value (±1e-9 to ±120)
Z3
Enable reading relative, use present value
Table D-1
Model 182 device-dependent command summary (cont’d)
Mode
Command
Description
Note
Summary of Contents for 2182
