Long-Range Medium-Load PTZ Camera
User Manual
70
Set duration: configure arming durations according to actual requirements.
Click the blue bar to pop up a window for editing the accurate start time and end time;
click "
Save
" to validate setting.
Click any duration and there will be small white squares on the 2 ends of it. Put the
mouse on any whit square, left-click and drag the edit the start time and end time.
Select the timeline of any day and delete the default blue bar. Left click on the mouse
and drag on the timeline from left to right to form a blue bar, above which it shows the
start time and end time.
Copy duration: click the copy icon
behind the timeline and copy the durations on the
day to one or several other days.
Delete duration: click "
Delete All
" above the timeline to delete all the durations. Select any
duration and click "
Delete
" on the popup window or above the timeline to delete the
duration.
Note: Select any duration with a mouse, and drag the blue bar on the timeline as a whole
without changing the length of recording duration.
8) Click "
Save
" to validate settings.
6.1.3
Guard Line
Guard line is to trigger an alarm once there is any object entering the guard line. Configuration
steps are as follows:
1) Go to
Settings > Event > Intelligent Function > Guard Line;
2) Select
“
Enable
”;
3) Adjust the surveillance scene through the PTZ;
4) Select a number from the dropdown list of Guard Area, which can be set one by one and takes
effect after each time of saving. It supports max 4 guard lines;
5) Select a direction from the dropdown list of Guard Line Direction, options including "A->", "B->"
and "A->&&B->"; "A->" means only when the object moves from A to B the system will trigger
an alarm, “B->” meaning only when objects move from B to A the system will trigger an alarm,
wh
ile “A->&&B->” meaning the system will trigger an alarm when object move from A to B and
B to A;