Long-Range Medium-Load PTZ Camera User Manual
96
Note: The storage card is
installed
in the camera when going out of the factory. When using the local
storage card for the first time, please click "Formatting" first.
7.2 Recording
After configuring scheduled recording, the camera will perform different video recording tasks automatically in
the configured durations and save the videos in the storage card. Configuration steps are shown below:
1) Go to
Settings > Storage > Storage Management
to configure disk full strategy and format the storage
card recognized by the camera. If formatting is succe
ssful, the Status will turn “Normal” which means the
storage card can be used normally;
2) Go to
Settings > Storage > Recording
to configure video recording;
Recording Type: Select the stream to be recorded. If none is selected, it will not be able to record
videos.
Code Stream Format: Select a video packaging format according to the type of access protocol.
Prerecord: Select prerecord duration, i.e. the prerecord duration before recording starts. It is certain
to be 30s.
Recording Delay: Select recording delay time, i.e. the prolonged recording duration after the
configured duration.
Picture 7-2 Scheduled recording
3) Select "Enable" to enable Scheduled Recording;
4) Set arming duration: the default is 24 hours displaying in blue bar, or user can customize durations. The
maximum allowed number of durations is 4 on one day and different durations cannot overlap with each
other;
