Long-Range Medium-Load PTZ Camera
User Manual
64
Picture 5-32 Positioning
Configuration steps are as follows:
Zero Correction
When the PTZ position fails to synchronize with the positioning or user wants it to return to the
zero position, zero correction can be performed. After zero correction, camera will return to the
mechanical zero position automatically. Click “Pan/Tilt Zero Correction” to perform.
Positioning
Present Coordinates: show the coordinates of current PTZ position.
Horizontal Coordinate: fill the target horizontal coordinate and click “Horizontal
Positioning”, then the PTZ will rotate to the target pan position.
Vertical Coordinate: fill the target vertical coordinate and click “Vertical Positioning”, then
the PTZ will rotate to the target tilt position.
Azimuth Positioning: it means the PTZ camera faces to the due north. Rotate the camera
to a specific position and click “Azimuth Positioning”. Save this position and set it as the
due n
orth direction. After azimuth positioning is set, when user enables “PTZ” OSD, it will
show the live direction of the camera.
5.5.8
Wiper
Go to
Settings > Camera > PTZ > Wiper
and enable wiper to clean the camera lens, options
including common wiper and sprayer wiper.
Common Wiper
