Long-Range Medium-Load PTZ Camera
User Manual
71
Picture 6-5 Guard line
6)
Set "Target Filter", i.e. target area. Click “
Edit
” and drag the mouse in the scene to draw a
rectangle. Click “
Stop
” after finishing and drag the slide bar of “Max and Min Target Ratio” (1%
by default). Moving objects over max or below min will not trigger an alarm when they enter the
guard line(s);
7) Area Setting
: to set guard lines. Click “
Edit
” and drag the mouse in the scene to draw a guard
line. User can click its starting or end point to adjust its length and angle, click “
Stop
” to stop
editing;
8) Drag
the slide bar of “Sensitivity” to set the guard line’s sensitivity to moving objects; the higher
the sensitivity is, the easier it will trigger an alarm;
