Kedacom IPC524 Series User Manual Download

Page: 105 / 114

Long-Range Medium-Load PTZ Camera User Manual

101

Note: Anonymous user has the authorization of live view only.



Add user:

Click

“

Add

”, and enter user name and password on the popup interface. Select user type from

the dropdown list, and assign operation rights to newly added user from the Authorization List. After

setting, click “

Confirm

”.

Picture 8-3 Add user

Note:



By default, all options are available to administrator users; Live View, Playback/ Snapshot, and PTZ

Control options are available to operator users; a browser can only view the live video from the

camera.



Some settings take effect after rebooting the camera, which requires user with both the authorizations

of configuration and reboot.



Modify user:

Select user and click “

Modify

” to modify on the popup interface.

Summary of Contents for IPC524 Series



















































































































Search results

Summary of Contents for IPC524 Series

Reviews:

Related manuals for IPC524 Series

Brands by name

Popular brands

Kedacom IPC524 Series, User Manual

Search results

Summary of Contents for IPC524 Series

Reviews:

Related manuals for IPC524 Series

Brands by name

Popular brands