Long-Range Medium-Load PTZ Camera
User Manual
61
3) The setting takes effect immediately. To clear limits, set one position both as the left and the
right limit, then the limits will be cleared.
4) When enabling manual mode, user can control the PTZ manually and rotate it only between
the left and the right limits; when enabling auto mode, the PTZ will patrol horizontally only
between the left and the right limits.
5.5.5
Path Mode
Path Mode means the camera patrols around all the valid presets on a path. After enabling this
function, click any button on PTZ control to disable it. Currently, the camera supports 8 paths and
the maximum allowed number of patrol spots on each path is 32 which can be selected from the
512 presets. Configuration steps are as follows:
1) Go to
Settings > Camera > PTZ > Path Mode.
Picture 5-28 Path mode
2) Select path from the dropdown list of
Patrol Path.
3)
Click “
Add
”. Set Patrol Spots and Stay Time in the popup interface. The maximum allowed
number of patrol spots on each path is 32 which can be selected from the 512 presets.
