Long-Range Medium-Load PTZ Camera
User Manual
46
SmartIR: SmartIR can adjust IR light illumination automatically. Select “SmartIR” and drag
the slide bar of SmartIR sensitivity.
WDR: WDR can provide optimal exposure when there is sharp contrast between the
background and foreground light (the former being too bright while the latter being too
dark). Select "WDR" from the drop-down list of Dynamic Adjustment and drag the slide
bar of "WDR Sensitivity".
Image Enhancement: "Defog" is disabled by default. When there is slight fog in the scene,
enable "Defog" and drag the slide bar of Defog Sensitivity.
Enable Gamma: Select the checkbox to enable the function. It can distinguish the dark part
and the bright part of the image effectively so as to improve image contrast.
Double Lens: Enabling this function will increase camera focal length, magnifying the original
focal length into two times.
Note: Only some models support this function.
Distortion Correction: It is disabled by default. When the radian of camera lens is too large and
the image is distorted, enable this function to correct the image and reduce image distortion.
Enabling this function will cause some loss of the image.
5.1.9
Image Stabilization
When the camera is installed in unstable environment, enable image stabilization to improve the
stability of images.
Picture 5-11 Image Stabilization
On the dropdown
list of Mode, select “Electronic Image Stabilization” or “Disable” and drag the
slide bar of EIS Level.
