Long-Range Medium-Load PTZ Camera
User Manual
66
6. Event
6.1 Intelligent Function
Go to
Settings > Event > Intelligent Function
, and configure the intelligent functions of the
camera.
The intelligent functions of a camera include motion detection, video blocked, guard line, defocus,
scene change, entry guard area, exit guard area, enter guard area, object left, object removal,
gathering and audio surge. In this chapter, we will introduce the configuration steps of each event
one by one.
6.1.1
Motion Detection
Motion detection is to detect if there is any moving object in specific areas during certain periods of
time. Once the moving object exceeds the defined sensitivity, the system will start video recording
or trigger an alarm according to the linkage method set by user. Configuration steps are as follows:
1) Go to
Settings > Event > Intelligent Function > Motion Detection;
2)
Select “
Enable
”;
3) Adjust the surveillance scene through the PTZ;
4) Set moti
on detection area, the default being full area detection. Click “
Clear All
” and then “
Edit
”
and the image will be divided into 16 columns and 12 lines of small squares. Click a square,
drag toward lower right and click “
Stop
”. Then the area is the detected area and it turns purple
red. A camera can support max 4 motion detection areas at the same time. Draw an area
toward upper left that contains the defined area, or click the defined squares one by one to
clear setting, or click “Clear All” to clear setting;
5)
Drag the slide bar to adjust the “
Sensitivity”
of motion detection. The higher the sensitivity is,
the easier it will trigger an alarm;
6) Select linkage type(s), which is/are the alarm output method(s) when motion detection triggers
an alarm;
