KaVo ESTETICA E70 Vision, Instructions For Use Manual

Page: 99 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.12 Using the foot control
CAUTION
Critical battery level
If the battery reaches a critical charge status, a signal is sounded every time a
function key is pressed.
▶ Always charge batteries when necessary.
▶ To ensure that the battery of the wireless foot control is always charged in
a timely manner, note the visual and acoustic signals of the wireless foot
control when starting the treatment unit.
4.12.3 Create a connection between the wireless foot
control and treatment unit
CAUTION
Loss of functionality due to interruption of wireless connection
Other coexistent wireless devices, which are working in the same frequency
band, could disturb the wireless connection of the foot control. Radio signals
could be influenced by each other, if two or more wireless foot controllers or
other wireless devices will be used in the same working environment.
▶ Separate channels must be selected in this case. A different channel has to
be selected if there are interferences with other devices.
Note
Only one wireless foot control per treatment centre can be registered to a RF
receiver. If another foot control was previously registered, the last foot con-
trol to be registered will be deleted with every new start of the synchronisa-
tion process.
Note
Every wireless foot control and every RF receiver has a unique address,
which can be exchanged during the synchronisation procedure. This ensures
unambiguous assignment.
The different wireless foot controls operate on different channels in order to
prevent interference during the application of several wireless foot controls.
RF receiver
①
"Up" key
②
"Down" key
③
"Confirmation" key
To establish a connection between the wireless foot control and the treatment
unit, the devices need to be synchronised. Synchronisation needs to be per-
formed once by a service technician.
99 / 178