KaVo ESTETICA E70 Vision Instructions For Use Manual Download Page 113

Page: 113 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision

4 Operation | 4.14 Using the KL 703 LED in ENDO mode (optional accessory)

CAUTION

Sharp-edged tips.

Risk of injury.

▶

When not in use, always keep the supplied torque wrench attached to the
tip!

Note

Please comply with the enclosed "PiezoLED" Instructions for Use.

Operation by means of the touchscreen

See also:

Changing settings for the PiezoLED

Operation with the foot control

▶

Press the "Instruments" foot pedal.

The PiezoLED works at the set intensity at levels 1 through 3.

▶

To adjust the intensity, move the "Instruments" foot pedal to the side.

4.14 Using the KL 703 LED in ENDO mode (optional
accessory)

4.14.1 General information

Note

The endo drive can only be operated with the INTRA LUX KL 703 LED.

INTRA LUX KL 703 LED

113 / 178

Summary of Contents for ESTETICA E70 Vision



















































































































































































Search results

Summary of Contents for ESTETICA E70 Vision

Reviews:

Related manuals for ESTETICA E70 Vision

Brands by name

Popular brands

KaVo ESTETICA E70 Vision, Instructions For Use Manual

Search results

Summary of Contents for ESTETICA E70 Vision

Reviews:

Related manuals for ESTETICA E70 Vision

Brands by name

Popular brands