Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.10 Using functions through the touchscreen
▶
Set the colour temperature using the "Colour temp". einstellen.
Set the brightness and type of dimming
▶
Tape the "Dim mode" key to toggle between COMPOsave and Dim mode.
ð
The active mode is indicated by the blue background.
ð
Tapping the "Dim operating light" key causes the active mode to be ex-
ecuted.
ð
The COMPOsave mode can be recognised by the yellow light.
Note
The "Set dimming mode for LED lamp" option is only indicated if an LED lamp
is installed on the treatment centre and has been activated by the technician
in service mode.
Note
Tapping the "Dim operating light" key switches on the COMPOsave mode.
The light can be dimmed in COMPOsave mode.
COMPOsave is a dimmer mode. In the COMPOsave mode the hardening of the
of the composite is greatly reduced by filtering the blue parts of the light spec-
trum.
Setting the brightness of the dimmer (COMPOsave
mode)
▶
Use the slider to set the brightness mode to one of 5 levels.
Note
The time it takes for composites to harden is dependent on the brightness or
the effective radiation intensity of the light: The processing time is reduced
with increasing brightness / effective radiation intensity. The processing time
for composites is prolonged with reducing brightness / effective radiation in-
tensity.
Note
The "Dim operating light" key can be added as a direct selection key to the
"Home screen" in the Settings menu.
▶
Tap the "Back" key twice to get to "Global settings".
73 / 178
Summary of Contents for ESTETICA E70 Vision
Page 1: ...Instructions for use ESTETICA E70 Vision E80 Vision...
Page 177: ......
Page 178: ...1 012 5446 Fk 20191030 9 en...
