Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.10 Using functions through the touchscreen
▶
Tap the timer again to stop the timer.
Note
The activated timer times are also displayed on the touchscreen.
If several timer times are running simultaneously, this is displayed in the se-
quence of when they elapse. A signal sound is issued whenever an activated
timer time elapses.
Setting the timer
Up to 59:59 minutes of timer time can be set using the timer.
▶
Tap the "Plus" key to generate a new timer.
View "New timer"
Two timer functions can be selected:
▪ Hourglass (the set timer time counts down)
▪ Stopwatch (counts the time)
▶
Tap the arrow keys to set the timer time.
▶
Tap the "Save" key to save the value.
▶
Tap the "Cancel" key to quit without saving.
ð
This causes the "Timer" menu to be displayed.
▶
Tap the
key next to Timer to edit a timer generated previously.
4.10.5 CONEXIO menu
The "CONEXIO" menu allows full access to all the critical data of a patient from
a treatment unit.
The following functions can be called up in the "CONEXIO" menu:
▪ Searching and filtering patient data
▪ Different possibilities of displaying patient images
▪ Storage of the images for patient communication
Opening and ending the "CONEXIO" menu
Requirement
The CONEXIO must be installed on a workstation computer and connected to
the practice network.
The computer must be switched on and connected to the treatment unit via a
network (Ethernet).
77 / 178
Summary of Contents for ESTETICA E70 Vision
Page 1: ...Instructions for use ESTETICA E70 Vision E80 Vision...
Page 177: ......
Page 178: ...1 012 5446 Fk 20191030 9 en...
