![background image](http://html1.mh-extra.com/html/karcher/waterclean-1600/waterclean-1600_operating-instructions-manual_655108054.webp)
OPERATION
Version 03/2008
WATERCLEAN 1600
- 48 -
3.2.5.3
Drinking Water Outlet
1.
Couple the drinking water hose to the respective coupling at the
connection panel (34/1).
Fig. 34
Drinking-water outlet
NOTE
Do not connect the drinking water hose yet to the
drinking water tank or to the depot location, as the
system must be disinfected first and then flushed
respectively.
2.
After disinfection and flushing, install the drinking water hose to
the drinking water tank or a similar container.
3.2.5.4
Industrial Water Outlet
If the conductivity of the drinking water produced exceeds
2 000 µS/cm, the system automatically switches over from the drink-
ing water to the industrial water outlet (35/1).
Fig. 35
Industrial-water outlet
1.
Connect the industrial water hose at the respective coupling
(33/1) of the connection panel and drain suitably.
NOTE
When conditioned water comes out of the indus-
trial water outlet, then the operator or the responsi-
ble authority must decide whether or not it can be
used as drinking water.
1
1
Summary of Contents for WATERCLEAN 1600
