![background image](http://html1.mh-extra.com/html/karcher/waterclean-1600/waterclean-1600_operating-instructions-manual_655108052.webp)
OPERATION
Version 03/2008
WATERCLEAN 1600
- 46 -
3.2.5
Hydraulic Connections
3.2.5.1
Raw Water Feed Inlet
1.
Connect raw water hose to the coupling "raw water inlet" (32/2)
at the container side.
2.
Unwind the raw water hose to the raw water source.
3.
Connect the raw water pump to the RW tank by hoses (the water
level in the RW tank must be higher than the pump level).
4.
Connect the hose coming from the raw water inlet of the WTC
1600 C to the pressure side of the raw water pump.
5.
Remove the bonnet from the pump.
6.
Open the venting screw on the pump. As soon as water comes
out of the venting screw, close the venting screw again.
7.
Insert plug of power supply cable for the raw water pump into
socket (32/1).
Alternative
1.
Inflate float (31/2) with hand pump.
Bild 31
Submergible raw water pump
2
1
Summary of Contents for WATERCLEAN 1600
