![background image](http://html1.mh-extra.com/html/karcher/waterclean-1600/waterclean-1600_operating-instructions-manual_655108091.webp)
WATERCLEAN 1600
Version 03/2008
MALFUNCTIONS AND MAINTENANCE
- 85 -
4.3
Maintenance
☞
The system is to be checked annually by an authorized KÄRCHER
dealer.
WARNING
If the system is subject to waste water/salt water
during maintenance work, then the system must
be rinsed thoroughly with drinking water.
4.3.1
Cleaning and Surface Treatment of the Complete System
When conditioning brackish and salt water (salt content > 5 000 ppm),
the equipment must be rinsed regularly with freshwater in order to
avoid corrosion of all equipment components. This also applies for lo-
cations in direct vicinity of oceans or bodies of water with similar salt
content.
When conditioning untreated water with low salt content
(< 5 000 ppm), this is performed in a similar manner, only that the in-
tervals are accordingly longer.
The equipment is delivered ex factory with a preservation coating to
protect against surface corrosion. This coating uses off with time, and
must therefore be renewed periodically.
The time intervals can be found in the maintenance plan.
4.3.1.1
Cleaning and Surface Protection
For cleaning purposes, drinking water (conditioned water) is
to be
used.
CAUTION
Switch off the system, disconnect power supply!
Exercise special caution when rinsing the electrical
components, in particular the switch cabinet.
WARNING
• Do not use high-pressure cleaners or similar equipment for
cleaning of the system. Wipe off surfaces that are accessible
from the outside with a moist cloth; if required, use a mild,
non-chafing cleaning agent, and wipe off afterwards with a
clean, moist cloth.
After the respective usage and regular cleaning of the system compo-
nents, the preservation of the surface must be renewed. For this, the
preservation kit (accessory / Part No.: 2.640-549.0) is to be used.
Summary of Contents for WATERCLEAN 1600
