![background image](http://html1.mh-extra.com/html/karcher/icc-2-euro-3/icc-2-euro-3_manual_3731318039.webp)
English
39
Clean/ set the spray nozzles:
Î
Clean the spray nozzle opening (1) us-
ing a wire.
Î
Adjust the spraying direction by turning
the spray head with a wire.
Change the wiper blades:
Î
Remove the fastening screw (2).
Î
Change the wiper blade.
Î
Lock parking brake.
Î
The side-brushes lift up.
Î
Clip side brush on to driver and screw
on.
Changing the wiper blade with the intake:
Î
Loosen the central screw.
Î
Remove the wiper blade.
Î
Fix in the new wiper blade.
Changing the wiper blade without the in-
take:
Î
Loosen the hexagonal nuts:
Î
Remove the wiper blade.
Î
Fix in the new wiper blade.
Î
Check tyre pressure and adjust if re-
quired.
Î
Set the idle running for the motor rpm
setting to 1600-1800 1/min.
Î
The side-brushes lift up.
Î
Drive sweeper on to a smooth, even
surface covered with a visible layer of
dust or chalk.
Î
Lower side-brushes and allow them to
briefly rotate.
Î
The side-brushes lift up.
Î
Drive machine backwards.
Î
Check sweeping mirror.
Contact surfaces of the side-brushes during
optimal setting (4-brush system).
Contact surfaces of the side-brushes during
optimal setting (2-brush system).
Î
Loosen the fastening screw (1).
Î
Adjust the side inclination of the side-
brushes by adjusting the holder (2).
Note
Always set the rear side-brushes first be-
cause changes to the rear inclination will
have an effect on the inclination of the front
brushes.
Î
Remove floor mat.
Î
Remove the floor plates (1) and (2).
Î
Loosen the fastening screw (1).
Î
Adjust the inclination of the side-brush-
es in the drive direction by adjusting the
holder (2).
Note
Set the left and right side always at the
same value.
Î
Loosen the fastening screws (1) of the
side-brush attachment .
Î
Adjust the inclination of the side-brush-
es in the drive direction by turning the
holder (2).
Î
Loosen the fastening screws (1) and (2)
of the side-brush attachment .
Î
Set the inclination of the side-brushes.
Î
Increase/ reduce the brush pressure by
adjusting the setting screw (3).
Note
In the 4-brush system, the contact pressure
can only be set for the front side-brushes.
Maintaining the wiper
Replacing side brush
Checking the sweeping mirror of the
side-brushes
Adjusting the side inclination of the rear
side-brushes (only 4-brush system)
Adjusting the inclination of the rear side-
brushes in drive direction (only 4-brush
system)
Adjusting the inclination of the front
side-brushes in drive direction (only 4-
brush system)
Adjusting the inclination of the side-
brushes (only 2-brush system)
Setting the brush contact pressure
Summary of Contents for ICC 2 Euro 3
