10.4.6.1 Changing the oil separator cartridge
Fig. 59 Changing the oil separator cartridge
1
Control air line union nut
2
Oil scavenge pipe (screwed to the cover)
3
Oil scavenge pipe union nut (screwed to
the dirt trap)
5
Air pipe
6
Pipe fitting
7
Cover
8
Fixing screw
9
Control valve
10
Solenoid valve plug
11
Gasket
12
Metal clip
13
Oil separator cartridge
Changing the oil separator cartridge
1. Unscrew the union nuts
1
and
3
and place the components with connections carefully to one
side.
2. Pull out the plug to the solenoid valve
10
and withdraw the cable.
3. Unscrew the fitting
6
and turn the air pipe
5
to one side.
4. Remove the screws
8
securing the cover
7
to the tank.
5. Carefully lift the cover and put to one side.
Take care that the oil scavenge pipe
2
screwed to the underside of the cover is not bent in
the process.
6. Take out the old cartridge
13
and gaskets
11
.
7. Clean all sealing surfaces, taking care that no foreign bodies (dirt particles) fall into the oil sep‐
arator tank.
Do not remove the metal clips!
The metal parts of the oil separator cartridge are electrically interconnected. The gaskets
11
are fitted with metal clips
12
that fulfil this requirement and provide an electrical path to the
oil separator tank and to the frame of the machine.
8. Insert the new oil separator cartridge with gaskets and screw down the cover.
9. Re-position the air pipe
5
.
10. Replace and tighten all loosened fittings.
10 Maintenance
10.4 Compressor Maintenance
No.: 9_6974 20 E
Service manual Portable compressor
M122
119
RAMIRENT
