1. Close and lock the access doors or canopy.
2. Position the fork truck to the side of the machine with the forks lined up with the lifting lugs.
3. Drive the forks fully through the lifting lugs as far as possible.
The forks are fully under the machine.
4. Lift the machine carefully.
12.2.6 Transporting as a load
The medium of transport determines the type of packing and securing.
Packing and securing methods must be such that, assuming proper handling, the goods arrive in
perfect condition at the destination.
Other measures must be taken for the transport of machines by sea or air. Please contact
KAESER Service for more information.
Material Chocks
Restraints or timber balks
Straps
Carry out a freight securing:
■ National directives and regulations for securing loads should be followed.
■ Load securing is taken to mean that by full braking or sudden turning the load will not
slide, fall, roll or cause unnecessary noise. Accepted technical regulations should be ob‐
served (e.g. VDI directive 2700 ff in Germany).
■ Responsibility for properly secured loads falls on the driver, the vehicle keeper and the
carrier.
Use chocks, restrainers or timber balks for securing the load.
If necessary, use straps across the chassis and the tow bar.
Fig. 91 Load secured by strapping
1.
NOTICE!
Vehicle body damage due to guys!
Movement during transportation can damage the bodywork.
➤ Do not use straps over the bodywork.
➤ Use straps only over the chassis.
2. Always observe valid accident and safety regulations when transporting.
3. The loads must be secured against rolling, tipping, slipping and falling.
12 Decommissioning, Storage and Transport
12.2 Transport
No.: 9_6974 20 E
Service manual Portable compressor
M122
237
RAMIRENT
