background image

- 36 -

7

0

5

0

F

7

0

.

3

0

.

5

0

C

K

7

0

.

3

0

.

5

0

C

K

2

1

4

0

F

e

m

a

N

-

D

t

ll

e

t

s

r

e

e

m

a

N

.

r

p

e

g

e

m

a

N

.

f

t

z

t

e

s

r

e

.

d

t

z

t

e

s

r

e

10. Garantiebedingungen

10.1 Allgemeines

Die Garantie erstreckt sich, im Rahmen unserer allgemeinen Liefer-
bedingungen, auf das gelieferte Filter/-system.

10.2 Garantieausschluß

Garantieansprüche bestehen nicht,

wenn das Filter/ -system durch Einfluß höherer Gewalt oder
durch Umwelteinflüsse beschädigt oder zerstört wird.

bei Schäden, die durch unsachgemäße Behandlung, ins-
besondere Nichtbeachtung der Betriebs- und Wartungsan-
leitung aufgetreten sind (regelmäßige Kontrolle des
Kondensatableiters / regelmäßiger Wechsel der Filter-
elemente).

falls das Filter/ -system nicht seinen Bestimmungen ent-
sprechend eingesetzt war (siehe Kapitel 3. „Technische
Daten“).

falls das Filter/ -system durch nicht hierfür autorisierte Werk-
stätten oder andere Personen unsachgemäß geöffnet oder
repariert wurde und/oder mechanische Beschädigungen
irgendwelcher Art aufweist.

10. Guarantee conditions

10.1 General

The guarantee covers the delivered device with regard to our general
terms of delivery.

10.2 Exclusion from guarantee coverage

No guarantee claims shall be assertible,

if the filter/ -system is damaged or destroyed due to force
majeurs or environmental effects.

for damage resulting from incorrect handling, in particular
failure to comply with the operating and maintenance
instructions (regular inspection of the condensate
discharger, regular change of the filter cartridges).

if the filter/ -system has not been used in accordance with
its specifications (see section 3. „Technical data“).

if the filter/ -system has been opened or repaired by
workshops or other persons unauthorised for this purpose
and/or reveals any type of mechanical damage.

FI HANK-MOB_02 D E

13 Annex

13.6 Operating instructions for compressed air filter (combination filter)

320

Service manual    Portable compressor   
M122  

No.: 9_6974 20 E

RAMIRENT

Summary of Contents for M122





























































































































































































































































































































































Reviews: